RO380
The RO380 is a high capacity, low cost system. It is designed for light commercial and residential applications and is suitable for offices, schools, restaurants, guest houses, hotels, food processing industries, and shopping centres.
The Super 380 provides high quality drinking water with a capacity up to 1,0 litre per minute depending on inlet water TDS and quality. The system is designed for direct flow and can be installed without a pressurized tank. It can also be installed with a tank. It is equipped with a High Flow Booster Pump for increased water production capacity.
- Double O-ring housings
- 2 x 200 GPD (1400 LPD) membranes
- High flow booster pump
- Modern ¼” standard faucet
- Installation instructions
- Installation fittings included
- Built in electrical shut-off valve (solenoid)
- Completely Assembled, 100% Factory Tested and Sterilized and ready for installation
Operation Pressure: | 20 – 90 psi (1,5 – 6 bar) |
Unit Measurement: | 46 x 30 x 56 cm |
Nett Weight: | 11,40 Kg |
Membrane: | 2 x 200 GPD (1400 litres per day) |
Daily Production: | 1400 litres per day depending on inlet water TDS and quality of water / 400 GPD |
Boosterpump: | High flow Booster Pump (36 VDC, flow 1 LPM, Max outlet pressure 130 PSI – 8.9 bar) |
- 10” 5 Micron Spun Polypropylene Sediment Filter
- 10” Granular Activated Carbon Filter
- 10” Carbon Block Filter
- 2 X 200 GPD Desal membrane (± 1400 litres per day)
- 10” In-line Post / Taste and Odour Filter
RO800
The RO800 is a compact semi-industrial Reverse Osmosis water purifier. It is designed for high recovery rates and minimum energy consumption. This unit produces 2 800 litres per day, depending on inlet water flow TDS and quality. A basic water analysis will determine suitable pre-filtration. It is ideal for small water bottling plants, as well as other industrial or pharmaceutical applications. The Procon pump can easily manage a second 2540 membrane to increase product water and reduce waste water to save money.
Daily Production: | 800 GPD (2800 LPD) |
Frame: | Stainless Steel (Grade 304) |
Dimensions of Purifier: | 50 (L) x 24 (W) x 80 (H) cm |
Weight: | 28 kg |
Membrane: | 1 X TW2540 Membrane |
Pre-Filtration: | 2 x 20” 1 micron sediment filters |
Pressure Pump: | Procon Pump |
Voltage: | 220V |
Hertz: | 50/60Hz |
Operating pressure (adj.): | 110 – 220 psi (7.6 – 15.2 bar) |
RO Membrane pressure vessel: | High pressure end prot type, 20 bar (300 PSI) |
Flow meters: | Permeate and concentrate |
Pressure gauges: | Feed water and operating pressure |
System protection: | Low pressure switch |
Power Supply: | 220 – 240 VAC (50/60Hertz) Single Phase |
Minimum inlet water feed: | 20 litres per minute |
Minimum inlet water pressure: | 36 psi (2.5 bar) |
Total hardness: | < 40 mg/ℓ |
Free chlorine: | 0 mg/ℓ |
TDS: | < 2 000 mg/ℓ |
Turbidity: | < 1 NTU |
pH: | 3 – 11 |
Iron: | < 0.01 mg/ℓ |
Silica: | < 1 mg/ℓ |
Temperature: | 5 – 40°C |
RO4000
The RO4000 is a high quality Reverse Osmosis system ideal for water shops or industries where high volumes of purified water are needed. This unit produces 14 000 litres per day, depending on inlet water flow TDS and quality. It comprises of a high quality multistage pump, two flow meters (permeate and concentrate), two pressure gauges (inlet and operating), and two 4040 membranes in series. The adjustable needle valve can manipulate the permeate/concentrate ratio. A basic water analysis will determine suitable pre-filtration to protect the membranes and optimise performance. The RO4000 is one of the best purifiers in its class. The powerful multistage pump can easily manage a third 4040 membrane to increase product water and reduce waste water to save money.
Daily Production: | 4 000 GPD (14 000 LPD) depending on inlet water TDS and quality |
Frame: | Stainless Steel (Grade 304) |
Dimensions of Purifier: | (cm) 50 (L) x 43 (W) x 120(H) |
Weight: | 80 kg |
Membrane: | 2 X 4040 Membrane |
Pre-Filtration: | 2 x 1 micron 20” sediment filters |
Pressure Pump: | 1.5KW (2HP) Vertical type Multistage Booster Pump |
Voltage: | 220V |
Hertz: | 50/60Hz |
Operating pressure (adj.): | 7.6 – 15.2 bar |
RO Membrane pressure vessel: | 304 Stainless steel with caps x 2 (Only one membrane) |
Electrical controls: | Micro-computer control, overload breakers, LED indicators |
Water quality indicator: | TDS meter with LCD |
Flow meters: | Permeate and concentrate |
Pressure gauges: | Feed water and operating pressure |
System protection: | Low pressure switch |
Power Supply: | 220 – 240 VAC (50/60Hertz) Single Phase |
Minimum inlet water feed: | 20 litres per minute |
Minimum inlet water pressure: | 36 psi (2.5 bar) |
Total hardness: | < 40 mg/ℓ |
Free chlorine: | 0 mg/ℓ |
TDS: | < 2 000 mg/ℓ |
Turbidity: | < 1 NTU |
pH: | 3 – 11 |
Iron: | < 0.01 mg/ℓ |
Silica: | < 1 mg/ℓ |
Temperature: | 5 – 40°C |