AQ-EC-105 Aquarium Purifier

AQ-EC105 - Aquarium Reverse Osmosis Purifier

Clean, pure water is a necessity for all fish.  No equipment is more effective in helping create ideal water conditions as a Reverse Osmosis (RO) unit combined with deionisation.  These units filter out up to 99% of chemicals found in tap water by forcing tap water through a semi-permeable membrane which removes 90 – 99% of tap water impurities, any remaining salts are removed by the mixed bed resin.  The result is water that is free of minerals and other contaminants.

Our deionisation filter takes the RO unit to a higher level of filtration. It is an excellent selection for reef enthusiasts and other serious aquarists, especially those who live in areas with exceptionally high levels of phosphates contaminants in their tap water.  Our unit includes: sediment pre-filter, carbon pre-filters and TFC RO membrane and a deionisation (DI) post filter in a clear housing.  The post deioniser removes the small percentage of contaminants which the membrane could not remove to give a TDS reading of 0mg/ℓ.

  •            Reverse Osmosis Technologies
  •            Easy to use
  •            Includes faucet adaptor for easy installation
  •            Include faucet adaptor for easy installation
  •            100% Factory tested and sterilized
  •            Deionisation (DI) filter
Operation Pressure:     50 –100 psi (3,5 – 6 bar)
Dimensions of Purifier: (cm) 36 (L) x 42 (H) x 14 (W)
Dimensions of Tank: (cm) 27 (L) x 43 (H) x 27 (W)
Weight of Purifier: 8 kg – System
Weight of Tank: 4 kg – Plastic tank only
Daily Production: 75 American gallons / ± 270 litres per day
Storage: 3.2 American gallons / ± 10 litre storage tank
  1. 5 Micron spun polypropylene sediment filter
  2. Granular Activated Carbon filter
  3. Carbon block filter
  4. 75 GPD Filmtec Membrane
  5. In line Post / Taste and Odour filter

EC105P - 5 Stage Booster Reverse Osmosis Purifier

EC105P

The Exclusive 5B is an inexpensive and durable 5 Stage Reverse Osmosis water purification system with a booster pump.  It is fitted with a 75GPD Filmtec RO membrane, 5 micron sediment filter, coconut shell taste and odour filter.  All connectors are EZ type.

  • Attractive long reach faucet
  • Housing wrench
  • Installation fittings
  • FDA Approved Polypropylene Flat Cap Housings (double O-ring)
  • Automatic shut-off Valve, Flow Restrictor, and Stainless Steel Check Valve
  • Feed water connector
  • Drain Saddle Valve
  • Completely Assembled
  • 100% Factory tested and sterilized ready for installation
  • Installation Instructions
  • EZ Connectors
Operation Pressure:     5 –100 psi (0,3 – 6 bar)
Dimensions of Purifier: (cm) 36 (L) x 45 (H) x 14 (W)
Dimensions of Tank: (cm) 27 (L) x 43 (H) x 27 (W)
Weight of Purifier: 12 kg – System
Weight of Tank: 4 kg – Plastic tank only
Daily Production: 75 American gallons / ± 270 litres per day
Storage: 3.2 American gallons / ± 10 litre storage tank
  1. 5 Micron spun polypropylene sediment filter
  2. Granular Activated Carbon filter
  3. Carbon block filter
  4. 75 GPD Filmtec Membrane
  5. In line Post / Taste and Odour filter