Water Softener RUNXIN 63B1
Solve your water hardness and scale problems the efficient way and save money!
Many water supplies in South Africa have damaging levels of calcium and magnesium making up hard water. This hard water will cause scale build-up on your plumbing and fixtures. It also shortens the life of clothes and other fabrics. At Absolutely Water we only use the best combination to build a water softener that will soften your water effectively. Using the high quality RUNXIN 63B1 control valves and brine tanks and high quality softening resin, we give you one of the highest rated systems on the market.
We have softeners to fit any size home or any water treatment need for small commercial use.
- Valve utilizes a high quality ceramic slice which is scale resistant and corrosion and leak proof.
- Simple electronic design with LED symbols and simple to program
- Display automatically locks after one minute
| Operating Pressure: | 29 psi (2 bar minimum) 73 psi (6 bar maximum) |
| Flow: | 2 000 Litres per hour |
| Controller Model: | Time Type or volumetric |
| Valve Material: | ¾” NPT (Female) |
| Bypass Valve: | Standard with variable blending |
| Water Temperature: | 5 to 45°C |
| Vessel: | 50 Litres |
| Electrical Rating: | 220 Volt / 60 Hz |
| Vessel: | 25, 50, 75, 100 Litres |
Siliphos
Get rid of scale and rust cost-effectively
It is easier to protect your appliances from scale build-up than you can imagine.
Siliphos has been serving the water industry for more than 30 years and is an economic and reliable water treatment system for potable and industrial water. Polyphosphates have long been used as an alternative form of hard water treatment. It is a soluble mineral compound which acts as a sequestering agent when added to water. Sequestering is simply the ability or tendency to tie up and hold in solution other minerals such as scale causing minerals which make them more water soluble. Therefore, the hard minerals act soft and remain in solution, as opposed to depositing scale.
Experience shows that scale and corrosion are not only found in galvanized but also in copper pipes. Siliphos will successfully remove and prevent scale forming and rust.
Siliphos ingredients are safe for human and animal consumption and comply with the WHO as well as NSF Standard 60 of the USA. Siliphos is colourless and odourless.
- Protect metal pipes from scale and rust
- Inexpensive and easy to install
- No electricity required
- Low and easy maintenance
- Prevents scale forming in coffee machines, freezers, geysers, irons, etc.
- Pressure up to 88 psi (6 bar)
- 1 Kilogram Siliphos can treat up to 100 000 litres of water
- 20” Plump housing holds 5kg, and 10” housings 2kg Siliphos
- Flow: 20” Plump : 10 000 litres per hour, and 10”, 2 000 litres per hour
Composition and Ingredients Information
| Chemical Name: | Sodium Calcium Magnesium Polyphosphate (Glassy) |
| Contents: | Polyphosphate and silicate |
CAS No.: 94551-68-5 | EC No.: 3054169
Hazardous Identification
| Hazardous substance: | None |
| Information pertaining to particular dangers for man and environment: | None |
First-aid measure
| General Information: | No special measures required |
| After inhalation: | Supply fresh air |
| After skin contact: | Rinse with warm water, product is not skin irritating |
| After eye contact: | Rinse opened eye for several minutes under running water |
| After swallowing: | Rinse out mouth and then drink plenty of water. In case of persistent symptoms consult doctor |
First-fighting measure
| General Information: | Non-flammable and non-explosive. No special measures required. |
| Suitable extinguishing agents: | Use firefighting measures that suit the environment, CO2, extinguishing powder or water jet. |
Accidental release measure
| Person-related safety precautions: | Wear protective clothing. |
| Measures for environment protection: | Do not allow product to reach sewage system or water bodies. |
| Measures for cleaning/collecting: | Collect mechanically |
| Additional information: | No dangerous materials are released. |
Handling and storage
Handling:
| Safe handling info: | No special measures required |
| Protection info against explosions and fires: | No special measures required |
Storage:
| Requirements to be met by storerooms and containers: | No special requirements |
| Information about storage in one common storage facility: | Not required |
| Further information about storage conditions: | Store in cool, dry conditions in well-sealed containers. |
Personal protection
Personal Protective Equipment
| General protective and hygiene measures: | The usual precautionary measures should be adhered to in handling the chemicals. |
| Breathing equipment: | Not required |
| Protection of hands: | Protective gloves |
| Eye protection: | Not required |
Physical and chemical properties
| Form: | Solid ball |
| Colour: | Colorless, transparent |
| Smell: | Odorless |
| Change in condition: | Melting point / Melting range: ca. 800˚C |
| Boiling point/Boiling range: | Not determined |
| Flash point: | Not applicable |
| Flammable: | Not flammable |
| Danger of Explosion: | Product is not explosive |
| Density: | Settled apparent density at 20˚C ca. 1450 kg/m3 |
| Solubility in water: | Slightly soluble |
| pH value: | 10g/ℓ) at 20˚C 6.0 ˜ 7.5 |
Stability and reactivity
| Stability: | Stable |
| Polymerized hazard: | Non-hazardous |
Toxicological information
| Acute Toxicity: | LD/LC50 values that is relevant for classification Components Type Value Species Siliphos LD50 > 2000mg/kg Ratte |
| Primary irritant effects: | On the skin: No irritant effect On the eye: No irritant effect Sensitization: No sensitizing effect known |
| Additional toxicological information: | In our experience and according to the information provided to us, the product does not have any harmful effects when used and handled according to specification. The material is not subject to classification according to EC lists in the last version. |
Ecological information
Information about elimination (persistence and degradability)
Other information: inorganic slats are not biodegradable.
Disposal
Disposed based on the laws and local regulations or contact the manufacturers.
Transportation
Before transporting, it should be fully packed and ensure the vessels are undisclosed. And in transportation it should be against from exposure, rainfall and high temperature.
Regulatory information
“Safety Administrative Regulations on Hazardous Chemical Products: and its enforcement regulates the safe application, production, storage, transportation and unloading etc.
Other information
This data are based on our present knowledge. However these shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship
Iron Man
IronMan Catalyst is formulated from manganese ore and activated in special proprietary furnace which is capable of removing iron, manganese, aluminium salts, tannins, chlorides and hydrogen sulphide from water through oxidation and filtration. Soluble iron, manganese etc. are oxidized and precipitated by contact with higher oxides of manganese on the IronMan granules. The hydrogen sulphide is eliminated by oxidation to sulphate and an insoluble precipitate. Precipitates are then filtered and removed by backwashing.
IronMan can be cleaned by vigorous backwashing.
Note: it is important that the IronMan media has suitable under-bedding and attention must be paid to the configuration of media bed depths and area.
| Colour: | Black |
| Dry Bulk Density: | 1750kg/m3 |
| Mesh sizes in mm: | 1 – 3 mm |
| Attrition loss per year in %: | 3 – 5% |
| Raw water pH: | 5.2 – 9.6 |
| Bed Depth: | 300 – 800mm depending on water characteristics |
| Service flow rate in cubes/hour sq metre: | 12 – 15 (18 – 24 intermittent flow possible) |
| Backwash flow rate in cubes/hour sq metre: | 30 – 50 (30 -50 cubes/hour depending on media configuration |
| Maximum temperature raw water in ˚C: | 70˚C |
Klorman
The Klorman is a compact, easy to install, easy to use chlorinator that converts feed-water into a continuous stream of active chlorine sanitizer. Klorman is ideal for any application where viruses, bacteria, fungal spores and protozoa need to be controlled. In most processes, only 10% of water used is usually responsible for 90% of all sanitation problems, and experience has shown that to chlorinate all input water at a single point in a facility is simply not the answer, since sanitation requirements vary for different applications.
The unit dispenses mild calcium-based chlorine that forms a sanitising solution which is non-corrosive, pH stable and environmentally safe.
